Mirror window tint "50% SILVER OUTSIDE"

Buying Silver 30 Outside film from Allstars Windows Film, you can be sure of the exceptional quality of the time-tested product. Warranty 5 years.

You will need the following tools for installation:

- spray;
- rubber squeegee;
- blade for cleaning glass;
- distillation;
- sharp knife for cutting film.

Professionals use a special tool, but in order to glue one or two windows with a sun-protection film, you can get by with improvised means.

Installation of solar control film at home:

1. Measure the size of the glass.
2. Cut out the film with a 1-2 cm allowance on the top and side.
3. Wash the window using soapy water, a squeegee and a blade. The blade can be taken from a construction knife, it can also be used to cut the film after installation on the window.
4. Reapply the soapy solution to the clean window.
5. Remove the protective layer of the film with two pieces of adhesive tape glued to the corner of the sun protection film. The adhesive layer at the time of detaching the protective layer must be sprayed with soapy water to prevent dust from entering.
6. Place the film on the glass and align it with the edges. Then, using distillation, expel water and air bubbles from the middle to the edges.
7. Trim the edges with a sharp knife and expel any remaining water. After applying the sun protection film, it is advisable not to open the windows for 12 hours.

For tinters and wholesale buyers a unique price offer, call +37124607040.